M-1 Universal Adhesive & Sealant #F1270

M-1 by Chem Link is a moisture cure, multi-purpose structural adhesive/sealant designed for bonding and sealing a wide range of construction materials. M-1 forms a tough, elastic & waterproof seal to most roofing materials, masonry, wood, glass, aluminum and foam. M-1 bonds well to most building surfaces including metal flashing, copings, skylights, and HVAC surfaces and makes for an excellent construction adhesive sealant for multiple applications.
M-1 Universal Adhesive & Sealant
Installation
Bonding surfaces should be clean, dry and free from all contamination that may inhibit the sealant’s performance. Isopropyl alcohol is an effective cleaner for surface preparation. Install all joint applications per ASTM and SWRI recommendations and guidelines. Please contact customer service for application guidelines for temperatures below 32 degrees F (0 degrees C). Maintain M-1 construction adhesive sealant at room temperature before application in order to ensure adequate tooling and adhesion. This adhesive sealant product sets rapidly upon exposure to moisture.
M-1 Universal Adhesive & Sealant.

Product identifier
Product name M-1
Other means of identification:
Synonyms No information available
Recommended use of the chemical and restrictions on use
Recommended use No information available
Recommended restrictions No information available
Manufacturer/Importer/Supplier/Distributor information:
Supplier CHEM LINK INC., 353 East Lyons St., Schoolcraft, MI 49087
Emergency telephone CHEMTREC: USA – 1-800-424-9300
International – (703) 527-3887

2. Hazard(s) identification

OSHA Regulatory Status
This material is considered as hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200)
Classification of the substance or mixture
Physical Hazards Not classified
Health Hazards Serious eye damage/eye irritation Category 2A
Skin sensitization Category 1B
Environment Hazards Not classified

GHS label elements

Signal word WARNING
Hazard statements Causes serious eye irritation.
May cause an allergic skin reaction.
Precautionary statements
Prevention Wash hands thoroughly after handling. Avoid breathing dust/fume/gas/mist/
vapors/spray. Contaminated work clothing must not be allowed out of the
workplace. Obtain special instructions before use. Do not handle until all
safety precautions have been read and understood. Wear protective
gloves/protective clothing/eye protection/face protection.
Response If in eyes: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get
medical advice/attention. IF ON SKIN: Wash with plenty of soap and water. If
skin irritation or rash occurs: Get medical advice/attention. Specific treatment
(see first aid instructions on label). Wash contaminated clothing before reuse.
If exposed or concerned: Get medical advice/attention.
Storage Store locked up.
Disposal Dispose of contents/container in accordance with local/ regional/ national/
international regulations.
M-1 Universal Adhesive & Sealant