TRIREX Fall Protection is a leading provider of advanced equipment and systems aimed at ensuring worker safety in various industries. With a focus on innovation and quality, TRIREX has developed a range of products that offer superior protection against falls in hazardous work environments. Their products include harnesses, lanyards, anchors, and other safety equipment that meet and exceed industry standards. TRIREX Fall Protection also offers comprehensive training programs to educate workers on the proper use of their equipment, further enhancing workplace safety.

The R2000™ maintains the same safety features of the popular Tri-Rex^TM with a lighter weight for when the situation warrants. The R2000™ mobile anchor cart allows for mobile and versatile fall protection for 2 person fall arrest and 2 person fall restraint. The R2000™ meets and exceeds OSHA 1926.502(D).

Dimensions

Width: 48″W
Height: 63″
Weight: 850lbs (base model)
Tires: Solid Polyurethane 18×8.5×8 flat free tires, needle bearings, with grease zerks
Platform Size: 78″ x 47″
Platform Height: 24″
Ground Clearance: 5-1/2″
Warranty: Manufacturers limited warranty covers any defect in workmanship or materials
Standard Job Box: 47.5″ wide x 24″ tall x 30″ deep
Weight: 125 lbs.
Materials: 16 gauge solid steel construction, powder coated

Approved Surfaces
BUILT-UP ROOFING (BUR)2
THERMOPLASTIC POLYOLEFIN (TPO)2
POLYVINYL CHLORIDE (PVC)2
BUILT-UP ROOFING (BUR) AND GRAVEL2
ROOF COATINGS 2
MODIFIED BITUMEN2
ETHYLENE PROPYLENE DIENE MONOMER (EPDM)2
BALLASTED SINGLE-PLY MEMBRANES2
INVERTED ROOF MEMBRANE ASSEMBLY (IRMA)4
PLYWOOD
DENSDECK® 3,6
POLYISOCYANURATE (ISO)1,4
EXTRUDED POLYSTYRENE (XPS)1,4
INSULATING LIGHTWEIGHT CONCRETE
HIGH DENSITY FIBERBOARD1,4
GYPSUM BOARD1,4
EXPANDED POLYSTYRENE (EPS)1,4
SPRAY-APPLIED POLYURETHANE 1,4
METAL DECK (22GA AND 20GA)
STRUCTURAL LIGHTWEIGHT CONCRETE
TOPSOIL—COMPACTED
ASPHALT PAVEMENT
PANELIZED SLAB FORMWORK5,6
METAL DECK (18GA4)
CONCRETE DECK (4000-6000PSI)
GYPSUM DECK
GRAVEL—COMPACTED
FLAT SURFACES AND UP TO 2:12 SLOPE.
WHEN MECHANICALLY FASTENED OR ADHERED TO AN APPROVED SUBSTRATE.
WHEN USED AS PART OF A COMPLETE ROOF ASSEMBLY.
SUBSTRATE IS ALLOWABLE WHEN COVERED WITH 3/4” PLYWOOD SECURED WITH A MINIMUM OF EIGHT (8) FASTENERS. FIG 1-2
WHEN TOTAL INSULATION THICKNESS IS GREATER THAN 3.875” OR USED WITH AN APPROVED METAL DECK. FIG 1-1
FALL RESTRAINT ONLY– MAXIMUM 2 USERS
UTILIZE ATTACHMENT POINT RESTRICTOR PLATES TO ELIMINATE OR LIMIT THE NUMBER OF USERS IN FALL ARREST
DensDeck® is a registered trademark of Georgia-Pacific Gypsum, LLC.