Guardian CB-12 Roof Anchor for Wood, Steel, or Concrete # 00645
SKU: 320.00 In stock
$254.95
Payment Method:
SKU: 320.00 In stock
$254.95
Payment Method:
The Guardian CB-12 Roof Anchor is a versatile and reliable safety device that can be installed on wood, steel, or concrete surfaces, making it a practical choice for a variety of construction projects. This anchor provides workers with a secure attachment point for their fall protection systems, ensuring their safety while working at elevated heights. The CB-12 is designed to withstand the harsh conditions of the construction site, with a durable construction that can hold up to 310 pounds.
One of the key features of the Guardian CB-12 Roof Anchor is its ease of installation, which allows for quick and efficient setup on different types of surfaces. This ensures that workers can easily set up their fall protection systems without wasting valuable time on complicated installation processes. Additionally, the CB-12 is compatible with a wide range of personal protective equipment, making it a versatile and practical choice for any construction project. Overall, the Guardian CB-12 Roof Anchor is a valuable tool for ensuring the safety of workers at elevated heights, providing them with a reliable attachment point for their fall protection systems.
Universal base plate
Q. What if I don’t meet the decking/substrate requirements of a ¾” CDX plywood or 20 ga. metal?
A. There are a variety of different methods. You can use 2×4 bracing for wood applications or you can lay a 4×4 sheet of wood or decking down over the top of the area where anchor points are going to be installed.
Q. Why?
A. Anything less than the above substrates will not hold 5,000 lbs. which is the requirement for attachment areas. By using 2×4 bracing or another sheet of material, screwed securely into the framing members (truss or purlins), you are, in essence, making that section of decking capable of meeting the 5,000 lb. requirement.
Q. What is the proper spacing if I want to run the 4 worker horizontal line system?
A. CB: 12’s thru 18’s: 20ft. on center SKYHOOKS: 16ft. on center
Q. How many workers does the horizontal cable system hold?
A. 4 in. FALL RESTRAINT per continuous run of cable; 1 in FALL ARREST per continuous run of cable
Q. How do I attach the cable system to the anchors? Do I attach to each one?
A. Terminate the cable on one end by running approx. 2 feet through the anchor and clamping it back to the remaining cable with at least 3 cable clamps. For Skyhooks, run the cable through the large hole, then through the small hole, and back through the large hole.
* Run the end of the cable line through each intermediate anchor (for Skyhook, run only through the large diameter hole)
* Do not stretch the cable tight! Allow 6 to 8″ extra line per 20ft. to allow for slack
* When selling the line, also add the 2 feet and the slack
* The slack absorbs some of the impact in a fall
Q. Can I install a CB-1-B on a flat roof?
A. No. Because it is a flat anchor with no upright it cannot be installed in any waterproof manner. It is intended for vertical structures.
Q. Can I install a CB-1-W for a permanent application?
A. ONLY if it is installed as recommended and then given some sort of weatherproofing finish. The current unit does not have any weather protection and will rust when exposed.
No videos for this product.
Follow Us
